SW-FA-311 Aluminum Fenders,

SP-005
Quick release stay bracket (double strap + plastic screw fix + clip fix)
• Double strap to fit tapered suspension fork.
• Quick release, easy installation and adjustment.
• Avaliable for Ø3.2/Ø3.9 mm stay.

SP-009 (Front Fork Clamp)
• SP-009-01: Ø39mm
• SP-009-04: Ø43mm
• SP-009-02: Ø41mm
• SP-009-05: Ø44mm
• SP-009-03: Ø42mm
• SP-009-06: Ø45mm

SP-013
Quick release stay bracket. (plastic screw fix)
• Quick release, easy installation and adjustment.
• SP-013-01:Available 12.7~25.4mm
• SP-013-02:Available 019-65mm
• Fender stay eyelet / FV-517/FV-515

804H
• Fender stay: Ø3.9mm
• Material: Steel
• Finishing: ED BK

804H-1
• Fender stay: Ø5.0mm
• Material: Steel
• Finishing: UCP

804H-5
• Fender stay: Ø3.9mm
• Material: POM
• 804H-5A: Ø3.2mm
• 804H-5B: Ø3.9mm
• 804H-5C: Ø5mm

804H-2
• Fender stay thickness ø3.2mm / ø3.9mm / ø5mm
• Easy installation
• 804H-2A: Ø3.2mm
• 804H-2B: Ø3.9mm
• 804H-2C: Ø5mm

804H-3
• Fender stay thickness ø3.2mm / ø3.9mm / ø5mm / ø6mm stay eyelet
• Stay eyelet diameter ø6mm
• 804H-3A: Ø3.2mm
• 804H-3B: Ø3.9mm
• 804H-3C: Ø5mm
• 804H-3D: Ø6mm stay eyelet

TYPE 1
FIX-LENGTH STAY WITH 1/4" END
• Fixs on dropout or fork end eyelets.
• Length customizable.
• Ø5 / Ø6mm

TYPE 2
FIX-LENGTH STAY WITH 5/16" END
• Fixs on front or rear hub axle.
• Length customizable.
• Ø8mm

TYPE 3
FIX-LENGTH STAY WITH 3/8" END
• Fixs on front or rear hub axle.
• Length customizable.
• Ø10mm

TYPE 4
MICRO-ADJUSTABLE STAY WITH U-SHAPE 1/4" END
• Fixs on dropout or fork end eyelets with M5/M6 screw.
• Length customizable.
• Ø5mm

TYPE 5
MICRO ADJUSTABLE
• Material: 304 Stainless Steel
• Stay length adjustable by fix SW-804
  clips to dropout or fork end eyelets.

804M SLIDE SHIM
• Slidable shim gives the possibility
  with 10mm length adjustment to fender stay.

804M-1 SLIDE SHIM
• Can with no limited length
  adjustment to fender stay
• only fit Ø 5mm fender strut

PATTERN STAMPING
• Prevent rotation

CUSTOM ANGLE BENDING

FV-515
(For Ø3.2/Ø4 mm FENDER-STAY)
FENDER STAY SAFETY POP-OFF
• Material: PA6
• Applicable to MSA/MSB/MSI/MSV fender-stays to pop-off when jammed.

FV-517
(For Ø5 mm FENDER-STAY)
Adjustable Fender Stay
• Material: PA6 / Aluminum
• Length: 120mm.
• Applicable to MSA/MSB fender-stays to adjust the length.
• e.g. 29" Bike MSA Fender Stay Length: 394mm.
• MSA Fender Stay can be adjusted to a length of 394 to 514 mm.

FV-517-1
• Material: PA6 / Aluminum
• Length: 120mm.
• Applicable to MSA/MSB fender-stays to adjust the length.

STAINLESS STEEL SELF-BEND HANGER
• Material: Stainless Steel
• Fit for Resin Fender Width:
  Short: 35mm~50mm
  Long: 50mm~80mm

SCBM-1
STANDARD FENDER-CHAINSTAY BRIDGE MOUNT (For Fender Width within 55mm.)
• Bolt fixs between fender and chainstay bridge.

SCBM-2
STANDARD FENDER-CHAINSTAY BRIDGE MOUNT (For Fender Width above 60mm.)
• Bolt fixs between fender and chainstay bridge.

SW-503E3 / SW-503E4
• FIT FENDER: FA-311-45

SW-503E1 / SW-503E2
• FIT FENDER: FA-311-38

SW-503F1
• FIT FENDER: FA-311-45E1

SW-503G1
• FIT FENDER: FA-311-50E1

SW-503H1
• FIT FENDER: FA-311-55E1

SW-503I1
• FIT FENDER: FA-311-60E1

SW-503J1
• FIT FENDER: FA-311-65E1

SW-803Q
• FIT FENDER: FA-311-55 / FA-311-55E1 / FA-311-60E1

SW-803V-70
• FIT FENDER: FA-311-70A / FA-311-70E1

SW-803V-75
• FIT FENDER: FA-311-75E3

SW-803N-38
• FIT FENDER: FA-311-38A

SW-803N-45
• FIT FENDER: FA-311-45A

SW-803N-55
• FIT FENDER: FA-311-55A

SW-803N-70
• FIT FENDER: FA-311-70A / FA-311-70E1

SW-801C

Cable Tunnel
• Fit Cable within Ø4.5mm
• Fit Ø3.9mm fender stay

SW-807B-1 / SW-807B-2 / SW-807B-3

Cable Tunnel Tool
• Slide-able and easy Snap-in
• Fit Cable within Ø10mm
• Can be assembled on both sides
• Only for SW-801E3

SW-809-01
Cable Tunnel Tool
• Fit Cable within Ø5mm
• Single or double cables.

SW-809-02
Cable Tunnel Tool
• Slide-able and easy Snap-in
• Fit Cable within Ø3.5mm
• Single or double cables.

SW-809-03
Supporting Brace
• Material: Stainless
• Finish: ED black

SW-808
• Fit Cable within Ø25mm